Laboratory Equipment > Microscopy > Microscopes > Fluorescence Microscopes > Optika Fluorescence B-383LD1 / B383LD2

Fluorescence Microscope: Optika B-383LD1 / B383LD2
B-383LD1: B Filterset
B-383LD2: B and G Filtersets

Rauserv c.c. in Johannesburg, Gauteng, South Africa can supply equipment to suit your application, Medical, Dental or Laboratory. Full service and repairs division available to assist at all times.
Imagine a fluorescence microscope that needs a lamp change every 50 000 hours. Imagine a fluorescence microscope with a cold light source that barely heats up during use. Imagine a fluorescence microscope that can be switched on, used immediately, switched off and then back on again. Imagine a fluorescence microscope that is so safe as to need no protection shield whatsoever, and that can be used by everyone, without any specific precaution. Imagine a fluorescence microscope that can be powered by batteries, as easily as a torchlight. Imagine a fluorescence microscope that is so sturdy and so compact that it can be used on the field, without any transport problems. You may think that such an instrument exists in your imagination only. Actually, such microscope is real, and its name is OPTIKA B-383LD. Developed by the OPTIKA Research labs, the B-383LD marks a revolution in the field of fluorescence microscopy. Strictly derived from the B-383FL model, of which it shares the body, the optics and the filter sets, the B-383LD employs high-power LED instead of the classical mercury vapour bulb. The LED is tailored to the specific applications (FITC-TRITC). The brightfield illuminator uses our X-LEDTM system, and the colour temperature closely matches sunlight. The microscope is available in two versions: B-383LD1 and B-383LD2.
  • Trinocular LED fluorescence microscope
  • IOS E-PLAN Objectives
  • X-LED Transmitted illumination
  • Nosepiece: 5 position on reversed revolving nosepiece. Ball bearing rotation.
  • Focusing system: Coaxial coarse and fine
  • Model: B-383LD1 and B-383LD2
  • Head: Trinocular, 30° inclined, 360° rotating. Interpupillary adjustment 48-75 mm.
  • Eyepieces: WF10X/20mm
  • Objectives: IOS E-PLAN 4x/0.10, 10x/0.25, 20x/0.40, 40x/0.65, and 50x/0.75 (no cover slide).
  • Stage: Double layer mechanical sliding stage, dimensions 216x150mm, moving range 78x54mm. Belt-drive in X direction.
  • Condenser: Abbe condenser, sliding-in, N.A. 1.25 with centering system.
  • Illumination: Transmitted light: X-LED3, with manual brightness control.
  • Warranty: 1 year

Fluorescence Illumination
  • B-383LD1: Epi-fluorescence: high-power blue LED.
  • B-383LD2: Epi-fluorescence: high-power white LED (for B ang G filtersets)