The CBS-350 Heating Shaker is an Orbital benchtop shaker that can accommodate 6 x 50 ml tubes. Interval mix function in program mode can be properly set according to user's experimental conditions.
Its polypropylene main body is highly chemical-resistant and easy-to-clean.
Optimal heat transfer is achieved by the tight coupling design of the main body and the corrosion-resistant anodized aluminum blocks.
Rauserv c.c. in Johannesburg, Gauteng, South Africa can supply equipment to suit your application, Medical, Dental or Laboratory. Full service and repairs division available to assist at all times.
Microprocessor PID control
Speed range from 150 to max. of 1500 rpm.(depend on a choice of interchangeable blocks)
Simple temperature calibration.
Memory function of programmed protocols allowing relevant parameters (such as temp., rpm, time) of each protocol step to be stored. - Up to 10 protocols allowed for memory storage. - Up to 10 steps allowed for each protocol. - Interval Mix function (continuous switching between shaking and phasing)
Two types of timer modes: - Timer 1 starts immediately after the timer setting. - Timer 2 starts only after reaching the set temp.
Bright VFD display with responsive touch buttons.
Low-profile design with rubber feet for minimal vibration and noise
Motion Type: Orbital
Display: VFD (0.1℃ resolution)
Range (℃): Amb. +5 to 100
Fluctuation at 37℃ (±℃): 0.5
Variation at 37℃ (±℃): 0.15
Heating Power: 360 Watts
Orbit Size (mm): 2
Overall (mm): 249 x 325 x 120
Net Weight (Kg): 8.3
Electrical: 230 V; 50/60 Hz; 1.7A
Warranty: 1 year
Speed range (RPM)
96-well tube block: 150 to 1500
0.5 ml tube block: 150 to 1000
1.5 ml tube block: 150 to 1000
50 ml tube block: 150 to 800
AAAJ4504: 96-well Tube Block Set with Cover 0.2mL x 96 holes (microtube)
AAAJ4501: 0.5㎖ Tube Block Set with Cover 0.5mL x 48 holes (microtube)
AAAJ4502: 1.5㎖ Tube Block Set with Cover 1.5mL x 24 holes (microtube)
AAAJ4503: 50㎖ Tube Block Set with Cover 50mL x 6 holes (centrifuge tube)