Laboratory Equipment > CO2 / Tri-gas Incubator > 185L CO2 / Tri-gas Incubator > HF160W Water-Jacketed

Heal Force CO2 / Tri-gas Incubator: HF160W 

HF160W: 160 Litre

The Heal Force CO2 incubators are widely used in scientific research to grow and maintain cell cultures. The HF160W applies long term effectiveness of the HEPA filter to protect your cultures. The filter is very efficient to entrap particulates larger than 0.3μm at 99.97%. The HEPA filter system runs continuously and within every 60 seconds, the volume of entire chamber is disinfected. With help of HEPA filter, the air quality achieves Class 100 clean room levels within 5 minutes following a door opening.
The large size Heal Force HF160W CO2 incubator incorporates a water jacketed system. Due to the heat retention characteristics of water, there is no sudden temperature change in the event of an unexpected power failure. A stable temperature environment is ensured.
Rauserv c.c. in Johannesburg, Gauteng, South Africa can supply equipment to suit your application, Medical, Dental or Laboratory. Full service and repairs division available to assist at all times.

Precise Temperature, CO2, O2 Control and High Humidity 

• Our HF160W CO2 incubator uses two individual PT1000 temperature sensors. 
  
• It utilizes long lasting reliable infrared or TCD CO2 sensor which offers specific measurement.
  
• Special water jacket design ensures the temperature precision and stability.
  
• Independent over-temperature safety control eliminates sample overheating. 
  
• A heated outer door minimizes cold spot that leads to condensation.
  
• The CO2 incubator has automatic calibration function, which helps ensure accuracy. 
  
• It realizes relative humidity measurement and display.
  

Contamination Control System 

• Chambers are pressed from a single sheet of stainless steel, so they have no weld or seam, thus helping avoid contamination. 
  
• Easily removable, replaceable shelves make cleaning chambers an easy task. 
  
• The CO2 incubator utilizes HEPA filter, which makes air reach cleanness class 100 standard.
  

User-friendly Interface 

• Our CO2 incubators feature a microprocessor with soft touch control panel for convenient operation. 
  
• Multicolor backlight LCD display shows temperature, CO2, O2 concentration and RH to users. 
  
• Comprehensive visual and audio alarms for all parameters are available.
  

• Standard quantity of shelves: 3
  
• Maximum quantity of shelves: 11
  
• Temperature setting range: Ambient +5~55℃
  
• Temperature setting deviation: ±0.1℃
  
• Temperature sensor: PT1000
  
• Heating system: water-jacketed
  
• Water jacket volume: 43.5 litres
  
• CO2 concentration setting range 0~20%
  
• CO2 concentration setting deviation: ±0.1%
  
• Recovery time of CO2 concentration to 50% at 37℃: Less than 3 minutes
  
• CO2 concentration sensor: Infrared or TCD (optional)
  
• Humidity: ≥ 95%
  
• Water reservoir volume: 3 litres
  
• Interior structure: 3 standard shelves with a glass doors
  
• Disinfection: HEPA filter
  
• Voltage: 230 V, 50 Hz
• Warranty: 1 year